The STI-1100 fits the following dimensions: 6.2"H x 5"W x 3.2"D

Pull Station not included

Features

• Cover is UV-stabilized against sun deterioration.
• Lifetime guarantee against breakage of polycarbonate cover in normal use (one year on electronic components).
• 95 dB or 105 dB self-contained alarm. Complete with battery.
• STI-1100 is for flush mount pull stations (Surface - see STI-1130).
• UL Listed to U.S. and Canadian safety standards (for standard and custom labeling)
• FM Approved.
• Polycarbonate rated -40°F to 120°F ( -40°C to 49°C).
• Fits virtually all manual pull stations (see Technical Data Sheet for dimensions).

Note: End user must verify the alarm and battery every six months and replace battery annually or as required.

Features

• Prewire Entire System, Then Install Your Signals
• Ease of Supervision Testing (Super Slide)
• Checkmate Feature: Instant Voltage Verification
• Lower Installation and Operating Costs
• Input Terminals 12 to 18 AWG
• Switch Selection for High or Low dBA
• Switch Selection for High or Low Frequency (1500-3000Hz)
• Tamperproof Re-entrant Grill
• Surface Mount with the GCSB (Gentex Surface Mount Box)
• Synchronize Strobe and/or Horn by Using Gentex Synchronization Module. AVSM
• Silence Horn While Strobes Remain Flashing
• Rugged Die Cast Metal Mounting Bracket
• True Evacuation Tone
• Wide Voltage Range 20-31 VDC or FWR
• Seperate Horn and Strobe Functions
• Widest Range of Candela Available
• Available in Red or Off-White
• UL/ULC Dual Listed 464, 1971

Description

The GCS/GCC Series is a ceiling mount strobe or horn/strobe combination that offers dependable audible and visual alarms and the lowest current available.

The Commander4 offers tamperproof field selectable candela options of 15, 30, 75, 95, 115 and 150 candela.

The GCC horn offers a continuous or synchable temporal three in 2400Hz or mechanical tone. These tones are easy for the professional to change in the field by using switches. The models are shipped from the factory in the temporal three alarm mode.

The GC Series has a minimal operating current and has a minimum flash rate of 1Hz regardless of input voltage.

The Commander4 Series comes standard with the 4" mounting plate which incorporates the popular Super-SlideTM feature that allows the installer to easily test for supervision.

The Commander4 also features the CheckmateTM - Instant Voltage Verification feature which allows the installer to check the voltage without removing the signal.

The GC Series appliances are UL 464 and UL 1971 listed for use with fire protective systems and are warranted for three years from the date of purchase

Features

• Plug-in design
• Shorting spring on mounting plate for pre-installation continuity check
• Captive mounting screw
• Torx screw for tamper resistance
• Field-selectable candela settings: 15, 15/75, 30, 75, 95, 110, 115
• Automatic selection of 12- or 24-volt operation at 15 and 15/75 candela
• Minimal intrusion into the back box
• Rotary switch for tone selection
• Two volume settings
• Electrically compatible with existing SpectrAlert products

Description

SpectrAlert Advance selectable-output chimes and chime/ strobes are private mode notification appliances used to alert trained personnel to investigate possible emergency situations and to take appropriate action. Security guard and nurse workstations are ideal locations for chime products.

SpectrAlert Advance chimes and chime/strobes are rich with features guaranteed to cut installation times and maximize profits. The SpectrAlert Advance series of notification appliances is designed to simplify your installations, with features such as: plug in designs, instant feedback messages to ensure correct installation of individual devices, and seven field-selectable candela settings for chime/ strobes.

More specifically, when installing Advance products, first attach a universal mounting plate to a four-inch square, four-inch octagon, single-gang, or double-gang junction box. Then, connect the notification appliance circuit wiring to the SEMS terminals on the mounting plate.

Finally, attach the chime or chime/strobe to the mounting plate by inserting the product’s tabs in the mounting plate’s grooves. The device will rotate into position, locking the product’s pins into the mounting plate’s terminals. The device will temporarily hold in place with a catch until it is secured with a captive mounting screw.

SpectrAlert Advance products allow you to choose:

• 12 or 24 volts
• At 24 volts, 15, 15/75, 30, 75, 95, 110, or 115 candela by way of rearmounted slide switch and front view window
• Chime tones and volume by way of rotary switch

Features

• Prewire Entire System, Then Install Your Signals
• Ease of Supervision Testing (Super Slide)
• Checkmate Feature: Instant Voltage Verification
• Lower Installation and Operating Costs
• Input Terminals 12 to 18 AWG
• Switch Selection for High or Low dBA
• Switch Selection for High or Low Frequency (1500-3000Hz)
• Tamperproof Re-entrant Grill
• Surface Mount with the GCSB (Gentex Surface Mount Box)
• Synchronize Strobe and/or Horn by Using Gentex Synchronization Module. AVSM
• Silence Horn While Strobes Remain Flashing
• Rugged Die Cast Metal Mounting Bracket
• True Evacuation Tone
• Wide Voltage Range 20-31 VDC or FWR
• Seperate Horn and Strobe Functions
• Widest Range of Candela Available
• Available in Red or Off-White
• UL/ULC Dual Listed 464, 1971

Description

The GCS/GCC Series is a ceiling mount strobe or horn/strobe combination that offers dependable audible and visual alarms and the lowest current available.

The Commander4 offers tamperproof field selectable candela options of 15, 30, 75, 95, 115 and 150 candela.

The GCC horn offers a continuous or synchable temporal three in 2400Hz or mechanical tone. These tones are easy for the professional to change in the field by using switches. The models are shipped from the factory in the temporal three alarm mode.

The GC Series has a minimal operating current and has a minimum flash rate of 1Hz regardless of input voltage.

The Commander4 Series comes standard with the 4" mounting plate which incorporates the popular Super-SlideTM feature that allows the installer to easily test for supervision.

The Commander4 also features the CheckmateTM - Instant Voltage Verification feature which allows the installer to check the voltage without removing the signal.

The GC Series appliances are UL 464 and UL 1971 listed for use with fire protective systems and are warranted for three years from the date of purchase

• UL Standards
  • Listed to UL Standard 2075, Standard for Safety for Gas and Vapor Detectors and Sensors.
  • Tested to UL 2075 using UL 2034 sensitivity limits for carbon monoxide gas.
• Flush or Surface Mountable
  • Surface mounts to a wall using the supplied enclosure rear housing.
  • Flush mounts in a 2" x 4" (1 1/2" deep minimum) single gang switch or handy electrical box.
• Testing
  • Test & Reset switch conducts internal tests and actuates Alarm Relay.
  • N.O. or N.C. SPST Alarm Relay and N.C. SPST Trouble Relay to connect to Alarm Control Panels.
  • Produces repeating loud tone bursts or buzzes during alarm and chirps if sensor trouble is found.
  • Microcomputer control allows for a mostly automatic operation.
  • Field test with the 3M CM-E1-FTK Field Calibration Kit
• Visual Display
  • GREEN: Normal operation.
  • FLASHING AMBER: Trouble, contact your installer or 3M Macurco Tech Support.
  • RED: Danger! Move to fresh air (hazardous condition is present).

Description

The 3M Macurco CM-E1 combines sophisticated sleekness with a smooth and easy installation system to provide state-of-the-art carbon monoxide detection in residential and commercial office environments.

Sleek

• Innovative Slim Design: Unlike other carbon monoxide detectors, the sleek CM-E1 unit extends less than 1/2" from the wall when flush mounted, so it blends seamlessly with your room's design elements.

Simple

• Speed Mount Installation: Designed with your industry in mind, the CM-E1 offers the exclusive 3M Speed Mount design, featuring a snap-in wire harness for swift and easy installation.
• Field Testable: Patented 3M EZ-Check technology allows installers to quickly test the CO sensor on site.
• 9- to 32-Volt Input: Compatible with 12-volt security systems and 24- to 30-volt fire alarm systems. The CM-E1 works for all your system installation needs.
• Expiration Functionality: Takes the guesswork out of determining when the CO detector has reached its end of life and needs replacing.

Certified

• Time-Honored Quality: The CM-E1 unit is backed by Macurco's reliable brand quality and 3M's history of customer dedication and satisfaction.
• NFPA® 720-2009: The CM-E1 design meets the NFPA® 720-2009 standard requiring CO sensor functionality and sensitivity testing effective 2012 and 2015 respectively.
• UL 2075 listed: Certified for system installation in both residential and commercial applications.

Specifications

Voltage: 9-32 VDC
Current (normal/alarm): 15mA /35mA @ 9-32V
Size: 3 1/8" x 5 1/8" x 1 1/2"
Alarm Relay: SPST, 100mA, 40VDC
Trouble Relay: SPST 100mA, 40VDC
Buzzer Rating: 85 dBA at 10 feet
Shipping Weight: One pound
Operating Temp. Range: 40° to 100° F
Alarm Setting: Per UL 2034
Color: White

Designed for use with a UL Listed alarm control panel. (May be used with a UL Listed Class 2 Power Supply.)

Features

• T25/2025 7/16" STAPLES
• STAPLE CROWN WIDTH: 1/4"
• Pack Size: 1,000 PACK

Features

• Converts almost any LCD monitor into a security monitor.
• NTSC or PAL input.
• Video input auto-configure: Automatically selects NTSC or PAL input
• Gold-plated BNC connector
• On screen display (OSD) functions: color, contrast, and brightness.
• Compact size, perfect for plug & play installation.
• Desktop or wall mountable.

Description

Converts most LCD monitors into security monitors. The converter allows displays with a VGA input to display video signals coming from a BNC connector.

Specifications

Features

• High 1280 1024 SXGA resolution
• Anti-Burn-in™ technology
• Video inputs (BNC in x 1, BNC out x 1)
• Looping video inputs for multiple connections
• Quick signal-switching time ( ≤0.8 sec. )
• NTSC/PAL auto-detection
• Selectable signal source
• PC compatible
• Built-in speakers
• Key lock function
• Auto-adjustment for optimal setting
• Security socket
• VESA standard wall mount

Description

With the AG Neovo SC-17, security centres can keep an eye on budgets without losing sight of performance. Digital and analogue video inputs, including looping BNC I/O, minimise installation cost. Auto NTSC/PAL detection, settings key lock and auto settings adjustment reduce maintenance hassle. Quick signal-switching and rapid response time improve surveillance efficiency, while built-in speakers provide an additional level of security. All this and more make the SC-17 the perfect value display choice for any security environment.

Specifications

Features

• High 1280 1024 SXGA resolution
• Anti-Burn-in™ technology
• Video inputs (BNC in x 1, BNC out x 1)
• Looping video inputs for multiple connections
• Quick signal-switching time ( ≤0.8 sec. )
• NTSC/PAL auto-detection
• Selectable signal source
• PC compatible
• Built-in speakers
• Key lock function
• Auto-adjustment for optimal setting
• Security socket
• VESA standard wall mount

Description

For a cost-effective surveillance display solution, look no further than the AG Neovo SC-19. A bright, high resolution full colour screen with quick signal-switching and 3ms response time ensures sharp, smooth video playback. Looping BNC video inputs and NTSC/PAL support maximise flexibility for system integration. And with built-in speakers, stylishly slim profile and VESA mountability, the SC-19 will look just as attractive as its amazingly affordable price.

Specifications

The new 5808W3 Photoelectric Wireless Smoke/Heat Detector is designed to help reduce false alarms as well as lower installation and maintenance costs.

Enhanced Nuisance Alarm (False alarms that can be caused by dust and dirt particles are minimized by the following technologies)

• Smoothing algorithms are mathematical calculations in the detector’s software that smooth out short term spikes from dust and smoke; thereby minimizing nuisance alarms.
  
• Smart Check circuitry sends a signal to the control panel when the detector requires cleaning. This allows dealers to schedule a regular, non-emergency service call to clean the detector before it goes into alarm.
  
• Drift compensation virtually eliminates nuisance alarms from long-term dust build-up by automatically adjusting the detector’s sensitivity.
  

Installation Cost Savings:

• No holes to drill or wires to run. Ideal for those difficult to wire locations, applications where room aesthetics are critical or where hazardous materials exist.
• A sturdy mounting base allows the detector to be mounted flush to walls, to smooth and uneven ceilings (i.e., stucco) and standard back boxes. Ideal for replacing old hardwired smoke detectors with new wireless smoke detectors.
  
• The Stop-Drop ‘N Lock feature simplifies the detector installation and removal with one rotation. It saves time by eliminating the need to align the head to the mounting base before rotating the detector and is ideal for poorly lit areas.
  

Testing and Maintenance Cost Savings:

• A removable detector cover and chamber top allows the technician to quickly and easily clean the detector chamber without disassembling the detector head.
• The handheld SENS-RDR Infrared Sensitivity Reader simplifies sensitivity measurements and displays the precise measurements in terms of percent per foot obscuration. The handheld SENS-RDR eliminates the need for magnets, voltmeters and ladders.
  
• The RT Removal Tool simplifies the attachment and removal of the detector head to the mounting base. It may be attached to a threaded extension pole or broom handles thereby eliminating the need for ladders.
  
• SENS-RDR – Handheld Infrared Sensitivity Reader.
  
• RT – Removal Tool.

View the Cut Sheet for detailed information

• Solar Powered
  • Environmentally friendly green technology.
• Dual Processors
  • Dedicated processors for both detection and wireless.
• ƒƒWireless Controls
  • Remote Arm/Disarm via Touch Pad or Fob.
• Multi-Area Notification
  • Alarms at the pool and inside the home.
• ASTM Approved
  • Tested tough - meets ASTM standard (F 2208-08) for pool alarm devices.
• Easy to Live With
  • Simple to Operate.
• FCC Approved
• Accepted solution for the California Swimming Pool Safety Act (115920-115922 Section 6) and the New York Title 19 NYCRR Part 1221.3 (new)

Accidental drowning is the leading cause of death in children under age five and the second leading cause of death in children under age 14*

Enhance Pool Safety with Layers of Protection

Comprehensive pool safety starts with active adult supervision and is backed with supplemental layers of protection. Pool fencing, pool covers, pool alarms, and gate & door alarms are all critical layers that help enhance the safety and security of your swimming pool environment. When a child or pet unknowingly gains access to an unsupervised pool area, it only takes a moment for tragedy to strike. In many cases, a child or pet falling into the water is an almost silent event. PoolSonix is specifically designed to detect the near silent wave activity associated with accidental pool entry. Within seconds of detecting the signature wave action, PoolSonix sounds a blaring alarm at the pool and inside the home, alerting a responsible adult to immediately take action.

What you Get

Base Unit		Wireless Keypad		Wireless Key Fob		Wireless Siren

*Required for installations with sloped pool coping. See page 15 in Installation Manual for details

WARNING: PoolSonix is designed to alert responsible adults to unwanted swimming pool intrusions. IT IS NOT A LIFE SAVING DEVICE. Immediate intervention by a responsible adult is required when the alarm sounds.

Active adult supervision is the first and most important layer of protection for any pool. PoolSonix is not a replacement for active adult supervision or a direct replacement for any other supplemental layer of protection, including, but not limited to, lifeguards, fences, gates, pool covers and locks. PoolSonix detects the signature wave associated with accidental drowning— it may not detect slow, gradual water entry.

*Centers for Disease Control and Prevention, National Center for Injury Prevention and Control (2008)

Features

• Multiple configurations available to satisfy a broad range of installations:
  • Single- and dual-circuit models
  • Fixed temp and combination fixed- temp/rate-of-rise
  • 135ºF or 194ºF ratings.
• Plain housing available for residential installations (model 5601P)
• Easy to use terminal screws that provide a more positive wiring connection
• A broader range of back box mounting options:
  • Single gang
  • 3.5" and 4" Octagonal
  • 4 square with square to round plaster ring
• Reversible mounting bracket for flush and surface mount installations

Description

System Sensor’s 5600 series mechanical heat detectors offer a low-cost means for property protection against fire, and for non-life-safety installations where smoke detectors are inappropriate.

Multiple configurations. The 5600 series offers a full-line of configurations to accommodate a broad range of applications. Both single- and dual-circuit models are offered, each available for low- and high-temperature ratings with either fixed temperature or combination fixed temperature/rate-of-rise (ROR) activation. The ROR element of the fixed/ROR models is restorable, to accommodate field-testing the unit.

Installation flexibility. To satisfy a variety of installations, the 5600 series easily mounts to single-gang and octagonal back boxes. These models also accommodate four-square back boxes, when used with a square to round plaster ring. The mounting bracket is reversible to allow for flush- and surface-mount back box installations.

Visual identification. The 5600 series provides clear markings on the exterior of the unit to ensure that the proper detector is being used. Alphanumeric characters identify the activation method, as well as the temperature rating, in degrees Fahrenheit and Celsius. Fixed temperature models are identified “FX”, while combination fixed/rate-of-rise units are marked “FX/ROR”. The 5600 series also provides a post-activation indicator in the form of a collector. Once the detector has been activated, the collector drops from the unit, to easily identify the specific unit in alarm.

Electrical Specifications

Operating Voltage / Contact Ratings

Physical Specifications

Ordering Information

Features

• Prewire Entire System, Then Install Your Signals
• Ease of Supervision Testing (Super Slide)
• Checkmate Feature: Instant Voltage Verification
• Lower Installation and Operating Costs
• Input Terminals 12 to 18 AWG
• Switch Selection for High or Low dBA
• Switch Selection for High or Low Frequency (1500-3000Hz)
• Tamperproof Re-entrant Grill
• Surface Mount with the GCSB (Gentex Surface Mount Box)
• Synchronize Strobe and/or Horn by Using Gentex Synchronization Module. AVSM
• Silence Horn While Strobes Remain Flashing
• Rugged Die Cast Metal Mounting Bracket
• True Evacuation Tone
• Wide Voltage Range 20-31 VDC or FWR
• Seperate Horn and Strobe Functions
• Widest Range of Candela Available
• Available in Red or Off-White
• UL/ULC Dual Listed 464, 1971

Description

The GCS/GCC Series is a ceiling mount strobe or horn/strobe combination that offers dependable audible and visual alarms and the lowest current available.

The Commander4 offers tamperproof field selectable candela options of 15, 30, 75, 95, 115 and 150 candela.

The GCC horn offers a continuous or synchable temporal three in 2400Hz or mechanical tone. These tones are easy for the professional to change in the field by using switches. The models are shipped from the factory in the temporal three alarm mode.

The GC Series has a minimal operating current and has a minimum flash rate of 1Hz regardless of input voltage.

The Commander4 Series comes standard with the 4" mounting plate which incorporates the popular Super-SlideTM feature that allows the installer to easily test for supervision.

The Commander4 also features the CheckmateTM - Instant Voltage Verification feature which allows the installer to check the voltage without removing the signal.

The GC Series appliances are UL 464 and UL 1971 listed for use with fire protective systems and are warranted for three years from the date of purchase

Features

• Prewire Entire System, Then Install Your Signals
• Ease of Supervision Testing (Super Slide)
• Checkmate Feature: Instant Voltage Verification
• Lower Installation and Operating Costs
• Input Terminals 12 to 18 AWG
• Switch Selection for High or Low dBA
• Switch Selection for High or Low Frequency (1500-3000Hz)
• Tamperproof Re-entrant Grill
• Surface Mount with the GCSB (Gentex Surface Mount Box)
• Synchronize Strobe and/or Horn by Using Gentex Synchronization Module. AVSM
• Silence Horn While Strobes Remain Flashing
• Rugged Die Cast Metal Mounting Bracket
• True Evacuation Tone
• Wide Voltage Range 20-31 VDC or FWR
• Seperate Horn and Strobe Functions
• Widest Range of Candela Available
• Available in Red or Off-White
• UL/ULC Dual Listed 464, 1971

Description

The GCS/GCC Series is a ceiling mount strobe or horn/strobe combination that offers dependable audible and visual alarms and the lowest current available.

The Commander4 offers tamperproof field selectable candela options of 15, 30, 75, 95, 115 and 150 candela.

The GCC horn offers a continuous or synchable temporal three in 2400Hz or mechanical tone. These tones are easy for the professional to change in the field by using switches. The models are shipped from the factory in the temporal three alarm mode.

The GC Series has a minimal operating current and has a minimum flash rate of 1Hz regardless of input voltage.

The Commander4 Series comes standard with the 4" mounting plate which incorporates the popular Super-SlideTM feature that allows the installer to easily test for supervision.

The Commander4 also features the CheckmateTM - Instant Voltage Verification feature which allows the installer to check the voltage without removing the signal.

The GC Series appliances are UL 464 and UL 1971 listed for use with fire protective systems and are warranted for three years from the date of purchase

Product Description:
AC Hardwired Transient Voltage Surge Suppressor

Housing: High impact plastic
Color: Black
Size: 3 in. x 1.5 in. x 1.5 in.
Weight: .1875

Features

• Available in 120VAC and 220VAC
• Horn Frequency 3100Hz (Nominal)
• Nominal 2.5% Sensitivity
• Functional Test Switch — Patented Three Position Test
• On-Site Maintenance Washing Program
• Quick-Disconnect Wiring Harness
• 90dBA Solid-State Non-Latching Piezo Horn
• Temporal 3 Evacuation Sounding Device (7003 Series)
• 1 Year Warranty From Date of Purchase
• 5-to-1 Signal-to-Noise Ratio
• Pulsing LED Sensing Chamber
• Fully Insect Screened
• Solid-State LED Condition Indicator
• Mounting Hardware Adapts to Standard Junction Boxes
• Dust Cover to Prevent Contamination During Installation
• Complies With IBC/IFC (7003 Series)

Description

The 7000/7003 Series of photoelectric smoke alarms is designed for residential, commercial residential and other occupancies defined by NFPA 101 and IBC, including homes, apartments, hospitals and hotels, in compliance with UL 217, UL1730, IBC and NFPA 72. Available in many different models, the 7000/7003 Series is engineered to virtually eliminate nuisance alarms and deliver outstanding performance wherever reliable fire protection is required.

The Gentex 7000/7003 Series provides an exclusive patented three position test feature that simulates a 0.85% and 3.5% actual smoke condition in full compliance with NFPA 72, UL 217 and UL1730 standards. It also provides a maintenance indicatorand makes the 100% testing requirement easy.

Options include self-restoring 135°F fixed temperature integral or isolated thermals, and Form A/Form C dry contacts for remote annunciation. Tandem interconnection of up to 12 units is available on several models; tandem interconnection of up to 6 units is available on “F” models, which activate the dry contacts from a remote alarm through the tandem wire or a local alarm.

Product Listings

• BFP (City of Chicago)
• MSFM Listing #1929
• BS+A/MEA #927-84-SA
• CSFM #7257-569:104
• UL 217 and UL1730 Listed

Product Compliance

• NFPA 72
• NFPA 101
• IBC/IFC

7100 Series - Solid State Piezo Sounder

Features

• Plug-in design
• Electrical compatibility with existing SpectrAlert products
• Shorting spring on mounting plate tests continuity before installation
• Rotary switch simplifies field selection of speaker voltage (25 and 70.7 Vrms) and power settings (1/4, 1/2, 1 and 2 watts)
• Ceiling and wall-mount application
• Universal mounting plate for wall- and ceiling-mount units
• Weatherproof per NEMA 4X, IP56
• Compatible with System Sensor synchronization protocol
• Automatic selection of 12- or 24-volt operation at 15 and 15/75 candela
• Field-selectable candela settings on wall and ceiling units

Description

The SpectrAlert Advance series offers the broadest line ofoutdoor speakers and speaker strobes in the industry. From metaland plastic outdoor back boxes, to white and red plastic housings, towall and ceiling mounting options, SpectrAlert Advance can meetvirtually any application requirement.

SpectrAlert Advance outdoor speakers and speaker strobes can beused indoors or outdoors in wet or dry applications, and can providereliable operation from ?40°F to 151°F. In addition, these speakersprovide a broad frequency response range, low harmonic distortionand maintain a high sound pressure level at all tap settings toprovide accurate and intelligible broadcast of evacuation messages.

The entire SpectrAlert Advance line, including speakers, provides aplug-in design that reduces ground faults by enabling installers topre-wire mounting plates and dress the wires before plugging inthe speakers. To enable faster installation times, a shorting spring onthe mounting plate provides instant feedback to ensure that wiringis properly connected. Furthermore, rotary switches simplify theselection of voltage and power settings. Both wall and ceiling speakerstrobes include field-selectable candela settings that enable installersto quickly set each device to meet application requirements.

The speakers weatherproof plastic back boxes (shipped withproduct) and metal back boxes (available separately) are designed toaccommodate in-and-out wiring for daisy chaining outdoor devices.Plastic back boxes feature removable side flanges and improvedresistance to saltwater corrosion. The screw-hole knock-outs locatedon the back of the back box eliminate the need to drill holes forscrew-in mounting. Both weatherproof back boxes come with3/4-inch top and bottom conduit entries and 3/4-inch knock-outs atthe back. Included with each back box is a screw-in NPT plug with anO-ring gasket for a water tight seal.

Specifications

Kit Includes:

• 1 x Solo 100 15ft Access Pole
• 3 x Solo 101 4ft Extension Poles
• 1 x Solo 200 Universal Removal Tool
• 1 x Solo 330 Dispenser
• 1 x Solo 460 Heat Detector Tester
• 1 x Solo 610 Carrying Bag
• 1 x Solo 725 Battery Charger
• 2 x Solo 760 Battery Batons

Features

• No need for ladders, lifts or scaffolding
• Reduces Test and Inspections times significantly
• NFPA Compliant detector test method
• Immediate Return On Investment
• The most Professional test method available!
• Kit for functional testing and removal/replacement of both smoke and heat detectors up to 30ft.

Description

SDI is dedicated to deliver the best fire alarm testing products available. The Solo 823 provides complete technician kits for testing, removing and replacing smokeand heat detectors.

Rely on Solo kits to professionally test all types of smoke and heat detectors up to 30ft.

• Enclosed delivery system for safe and efficient aerosol usage
• Poles are telescopic, made of non-conductive reinforced fiberglass
• "Preferred" equipment by Fire Alarm Professionals across the globe
• SOLO products complete with LIFETIME WARRANTY

• Hybrid style sensor that monitors at the national standards set by OSHA and UL 2075/2034
• "Snap-in" sensor is easily replaced at end of life
• Solid green LED on sensor head indicates normal operation
• Detector Test Mode for aerosol CO testing
• Historical and retrievable reporting data stored at unit
• Performs self test every 24 hours
• Patented front or rear loading sampling/exhaust tubes
• Connectable to up to 30 other units
• Advanced sensor design yields internal dust filtering
• No additional screens or filters necessary
• Compatible with Building Automation and Combination CO/Fire Alarm Systems
• Complete wiring details permanently attached to unit

Description

The SSU-SL-701-KIT Duct Carbon Monoxide Detector Kit provides early detection of carbon monoxide in air moving through the HVAC duct supply, return, or both in commercial, industrial, or residential applications.

The SSU-SL-701-KIT is fitted with a UL Listed electrochemical sensor that notifies at for distinct levels of carbon monoxide PPM published hazardous by both OSHA and the NFPA, and has a life of approximately six years in normal environmental conditions. The specific alarm condition met is annunciated at the detector, and historical data can be retrieved from the unit to aid in resolving the source of contamination.

The SSU-SL-701-KIT alerts building occupants of an AHU-circulated carbon monoxide contamination prior to itsdistribution of the "occupied" space. Output terminals are provided for the MSR-50/CO remote accessory, used toprovide private mode (non-public) audible and visual alarm indication in a remote location. Combination CO /Fire Alarm Control Units can, and must, be notified of an alarm or trouble condition to provide Public ModeNotification and Remote Reporting.

The SL-701 is a CO system detector, it is not a smoke detector or a CO alarm. It detects Carbon Monoxide as caused by fossil fuel fired appliances and/or as introduced from the outside in fresh air intakes in the HVAC system.

Specifications

Electrochemical Sensing Technology - Electrochemical detectors are the newest, most refined CO detectors available and provide the most accurate measurement of CO concentration obtainable. They can take readings from low levels that may be hazardous over long periods of time to high concentrations that present an immediate danger.

Local Sounder - A built-in piezoelectric horn generates the ANSI S3.41 temporal 4 pattern in an alarm condition. The local sounder will also alert the end-user of other conditions such as low battery, detector trouble and end-of-life.

LED Status Indicators - Dual LEDs provide local visual indication of the detector’s status–including normal operation, alarm, low battery, trouble and end-of-life.

End of Life Timer - When the detector has reached the end of its life, the detector will send a trouble signal to the panel. This indicates that the CO sensor inside the detector has passed the end of its life and the detector needs to be replaced. The detector’s lifespan is approximately six years from the date of manufacture.

Full Supervision - The 5800CO is fully supervised to monitor for low battery, case tamper and trouble conditions.

Test/Hush Button - This dual purpose button allows the end-user to perform periodic testing of the detector. In the event of a CO alarm, this button will silence the local sounder alarm for a five minute period. Note: the Hush feature will not operate at levels above 350 ppm (parts per million) carbon monoxide.

Versatile Mounting - Whether you choose to affix the detector to the ceiling or a wall, mounting is made simple with the enclosed hardware. The mounting base has large mounting ports, which accommodate drywall anchors for easy surface mounting.

Tamper Protection and Tamper Resistant Element - The detector has a built-in tamper switch that can communicate back to the control panel in the event it is removed from the base. For an added level of security, the detector also includes a tamper resistant element that prevents removal from the base without the use of a tool.

Description

The 5800CO is a 3V battery powered wireless carbon monoxide (CO) detector intended for use with Honeywell alarm systems that support 5800 Series wireless devices. It provides early warning when its electrochemical sensing technology measures carbon monoxide levels in the air. The 5800CO is specifically designed for system operation and is fully listed to UL 2075 as a system supervised detector.* It contains a piezoelectric horn which generates the ANSI S3.41 temporal 4 pattern in an alarm condition.

The detector consists of an electrochemical carbon monoxide sensor assembly coupled with a wireless transmitter. The transmitter can send alarm, trouble, end-of-life, tamper and low battery condition messages to the alarm panel.

Since there are no holes to drill or wires to run, you can preserve the beauty of the home or building while protecting its occupants from harmful carbon monoxide gas. The 5800CO is an ideal carbon monoxide detector for difficult to wire locations, applications where room aesthetics are critical or where hazardous materials exist.

What is Carbon Monoxide and How Can it Harm Consumers?
Carbon monoxide (CO) is an odorless, colorless, tasteless and highly toxic gas that is produced when fuels such as wood, gasoline, charcoal and oil are burned with insufficient air. The majority of residential and commercial fatalities caused from these fuels come from heating systems, engine powered tools and charcoal grills. Carbon monoxide is harmful when inhaled because it displaces oxygen in the blood and deprives the heart, brain and other vital organs of oxygen. Large amounts of CO can overcome a person in minutes without warning—causing them to lose consciousness and suffocate.

The 5800CO is designed to warn the end-user well before the CO reaches a fatal level. The detector’s CO sensitivity is evaluated to UL 2034.

Specifications

Compatibility

Compatible with Ademco/Honeywell panels that support 5800 Series devices.

• LYNX Plus Control Panel
• (3) 5816 Window/Door Transmitters
• (1) 5800PI Wireless Motion Detector (PIR)
• (1) 5804 Wireless Key Remote
• (1) Instructional DVD

Features

• Two-way voice communication with the central station operator through the alarm system helps ensure that the proper emergency response personnel will be dispatched to your home.
• Home control options enable you to turn lights on or off and control garage doors with the touch of a button.
• Monitored wireless smoke, heat and carbon monoxide detectors protect you and your family from life-threatening hazards.
• Compact, stylish sensor housings can be custom-painted to match any décor. You can also protect doors, open areas and windows with contacts, glassbreaks and motion sensors.
• The "Follow Me" feature enables the system to call and alert you to alarms and important reminders.
• Voice prompted clock setting
• Full voice response
• The Family Message Center lets everyone record and playback voice messages for one another.
• Wireless Asset Protection Sensors can alert you when an attempt is made to move or disturb valuable objects within your home.
• Remote phone control
• Optional bidirectional remote provides system status feedback
• Optional wireless, programmable remotes offer single-button system control
• Activates lights, appliances, garage doors and numerous other applications with the touch of a button or at specified times (with optional X-10® devices and transformer)
• Quick exit feature enables users to leave the house for a brief time without disarming the system
• Chime by zone feature sounds chime and speaks location in plain English
• Single button operation

Description

The user-friendly LYNX Plus puts security and convenience at your fingertips. The vibrant, easy-to-read display is easier to use than traditional security systems—announcing the exact type and location of an alarm in plain English and giving you the information you need so you can react quickly. Sleek, stylish and portable, it blends with any décor and can be placed on a wall or tabletop.

With its uncompromising technology, reliability and self-contained architecture, Honeywell’s LYNX Plus is an easy-to-install security system. LYNX Plus is a combination control panel, keypad, siren, dialer, two-way voice system and speakerphone in one. It offers full Contact ID information to your central station via TELCO, Internet GSM communications using the 7847i-L or GSMVLP. It also offers two-way voice over GSM radio using the GSMVLP. The GSM radio or Internet communications module easily install inside the same plastic case as the LYNX Plus with no additional enclosures to mount. The new communications options give you the flexibility you need to address the emergence of VoIP, POTS migration to cellular and the growth of digital radio networks.

The all-in-one integrated design combines the installation flexibility for every job with the proven reliability of Honeywell’s technology. The convenient voice prompt programming feature walks you through the installation process—helping reduce installation costs. The voice annunciation of system status and alarm conditions greatly reduce the amount of end-user training. LYNX Plus supports all Honeywell 5800 Series wireless devices, including the 5828 and 5828V wireless keypads.

• (1) Silent Knight 5808 addressable fire alarm control panel
• (5) SK-PHOTO addressable photoelectric smoke detectors
• (2) SK-PULL-DA addressable single-action pull stations

Features

• Using SK-Devices increases the 5800 FACP point capacity (99 detectors + 99 modules)
• Saves time with SK device code wheel addressing

Silent Knight Compatibility Doc	Full list of accessories, initiating and notification devices compatible with Silent Knight fire alarm control panels
Battery Calculator	Microsoft® Excel Spreadsheets for calculating battery requirements for Control Panels and Power Supplies
Silent Knight Selection Tool	SKST is an application that allows you to configure a bill of materials for conventional and addressable Silent Knight panels.

Accessory for:

• EnviroAlert EA200-12
• EnviroAlert EA200-24
• EnviroAlert EA400-12
• EnviroAlert EA400-24
• EnviroAlert EA800
• EA-WMFS
• WaterBug 800

Specifications

Accessory for:

• WaterBug 200
• WaterBug 350
• WaterBug 800

Specifications