System Sensor P2R 2-Wire H/S, Multi-Candella, Red

Electrically compatible with existing SpectrAlert products
Automatic selection of 12- or 24-volt operation at 15 and 15/75 candela
Plug-in design
Field selectable candela settings on wall and ceiling units: 15, 15/75, 30, 75, 95, 110, 115, 135, 150, 177, 185
Same mounting plate for wall- and ceiling-mount units
Shorting spring on mounting plate for continuity check before installation
Tamper resistant construction
Outdoor wall and ceiling products rated from –40°F to 151°F
Design allows minimal intrusion into the back box
Horn rated at 88+ dbA at 16 volts
Rotary switch for horn tone and three volume selections
Outdoor products UL listed to UL 1638 (strobe) and UL 464 (horn) outdoor requirements
Outdoor products rainproof per UL 50 (NEMA 3R)
Compatible with MDL sync module

The SpectrAlert Advance series of notification appliances is designed to simplify installations, with features such as plug in designs, instant feedback messages to ensure correct installation of individual devices, and 11 field-selectable candela settings for wall and ceiling strobes and horn/strobes.

When installing Advance products, first attach a universal mounting plate to a four-inch square, four-inch octagon or double-gang junction box. The two-wire mounting plate attaches to a single-gang junction box.

Next, connect the notification appliance circuit wiring to the SEMS terminals on the mounting plate.

Finally, attach the horn, strobe or horn/strobe to the mounting plate by inserting the product’s tabs in the mounting plate’s grooves. The device will rotate into position, locking the product’s pins into the mounting plate’s terminals. The device will temporarily hold in place with a catch until it is secured with a captured mounting screw.

The SpectrAlert Advance series includes outdoor notification appliances. Outdoor strobes and horn/strobes (two wire and four wire) are available for wall or ceiling. Outdoor horns are available for wall only. All System Sensor outdoor products are rated between minus 40 degrees Fahrenheit and 151 degrees Fahrenheit in wet or dry applications.

Standard Operating Temperature	32°F to 120°F (0°C to 49°C)
K Series Operating Temperature	–40°F to 151°F (–40°C to 66°C)
Humidity Range	10 to 93% non-condensing (indoor products)
Strobe Flash Rate	1 flash per second
Nominal Voltage	Regulated 12DC/FWR or regulated 24DC/FWR1
Operating Voltage Range2	8 to 17.5 V (12V nominal) or 16 to 33 V (24 nominal)
Input terminal wire gauge	12 to 18 AWG
Ceiling mount dimensions (including lens)	6.8½ diameter × 2.5½ high (173 mm diameter × 64 mm high)
Wall mount dimensions (including lens)	5.6½L × 4.7½W × 2.5½D (142 mm L × 119 mm W × 64 mm D)
Horn dimensions	5.6½L × 4.7½W × 1.3½D (142 mm L × 119 mm W × 33 mm D)
Wall-mount back box skirt dimensions (BBS-2, BBSW-2)	5.9½L × 5.0½W × 2.2½D (151 mm L × 128 mm W × 56 mm D)
Ceiling-mount back box skirt dimensions (BBSC-2, BBSCW-2)	7.1½ diameter × 2.25½ high (180 mm diameter × 57 mm high)
Wall-mount weatherproof back box dimensions (SA-WBB)	5.7½L × 5.1½W × 2.0½D (145 mm L × 130 mm W × 51 mm D)
Ceiling-mount weatherproof back box dimensions (SA-WBBC)	7.1½ diameter × 2.0½ high (180 mm diameter × 51 mm high)
Notes:
1. Full Wave Rectified (FWR) voltage is a non-regulated, time varying power source that is used on some power supply and panel outputs. 2. P, S, PC, and SC products will operate at 12 V nominal only for 15 and 15/75 cd.

Download the System Sensor P2R Cut Sheet

System Sensor P2R 2-Wire H/S, Multi-Candella, Red

[ITEMPRICE]

~~[ITEMPRICE]~~
[ITEMSALEPRICE]


System Sensor P2R 2-Wire H/S, Multi-Candella, Red
[ITEMPRICE] ~~[ITEMPRICE]~~ [ITEMSALEPRICE]

Accessories designed for use with this product - To add any of these accessories to your order, simply fill in the quantity you want and click the large "Add to Cart" button above

Product Name/Description	Price	Quantity

	System Sensor P2R 2-Wire H/S, Multi-Candella, Red	[ITEMPRICE] ~~[ITEMPRICE]~~ [ITEMSALEPRICE]
	The SpectrAlert Advance P2R is a red, two-wire horn/strobe with selectable strobe settings of 15, 15/75, 30, 75, 95, 110 and 115 cd.

Average Rating

	[short_review]
	[long_review]
	Reviewed by: [user_name] from [user_city]. [user_email] on [review_date]