Honeywell HP300ULM, 12/24VDC 2.5A Power Supply, 6 Outputs

Features

• HP300ULM - includes the power supply, HPMOM6 multi-output power distribution module, enclosure, transformer and battery leads.
• An all in one power supply and distribution unit enclosed in roomy cabinet.
• Transformer thermal protection limits damage from overloaded circuits.
• LED lights for quick and easy diagnosis, troubleshooting, and status indication.
• Comes fully assembled with accessories included for quick installation.
• Enclosure built for durability and product life.
• Power disconnect switch makes for easy servicing.
• Power cord included and has three conductors for ground safety convenience.
• Instantaneous switchover to standby battery (if equipped) when AC fails, maintaining power to all attached devices without intervention.

Description

The HP300UL Series is a line of power limited supplies/chargers that will convert 115 VAC/60 Hz input into a power limited 12 VDC or 24 VDC output @ 2.5 A. They are used in applications requiring UL Listing for Access Control (UL294), Fire Alarm (UL1481), and Burglar Alarm Installations (UL603).

Specifications

• UL294 for use with Access Control Systems.
• UL1481 for use with Fire Alarm Systems.
• UL603 for use with Burglar Alarm Installations.
• Switch selectable 12 VDC or 24 VDC power limited output.
• Input: 115 VAC /60 Hz, 0.9A.
• 2.5 A continuous supply current at 12 VDC or 24 VDC.
• Filtered and electronically regulated outputs.
• Built-in charger for sealed lead acid or gel type batteries. Charge current 600mA.
• Automatic switch-over to standby battery when AC fails.
• AC input and DC output LED indicators.
• AC fail supervision (Form "C" contacts).
• Low battery supervision (Form "C" contacts).
• Low battery disconnect prevents batteries from deep discharge.
• Thermal overload protection.
• Short circuit protection.
• Includes battery leads.
• Enclosure Dimensions: 13"H x 13.5"W x 3.25"D (cm: 33.02H x 34.29W x 8.26D).
  Accommodates up to two (2) 12AH batteries.

HPMOM6 Specifications

• NFPA 72 compliant.
• Class 2 outputs.
• 12 VDC or 24 VDC operation.
• Six (6) individual power-limited outputs. Current limit is 2.5 A @ 12 VDC or 24 VDC per output.
• Fire Alarm Panel or Access Control System inputs (NO or NC supervised trigger input and polarity reversal trigger input).
• Red LEDs indicate condition of each power output.
• Power and input trigger LEDs.
• Power fail supervision relay (Form "C" rates 1.0 A @ 28 VDC/ 115 VAC).
• Output relay indicates unit is triggered (Form "C" rated 1.0 A @ 28 VDC/115 VAC).
• Interfaces with most DC power supplies.
• Board Dimensions: 5.3"L x 3.5"W x 1"H (cm: 13.46L x 8.89W x 2.54H).