Fire-Lite CP355 Addressable Ion Detector

Features

• SLC Loop
  • 2-wire loop connection.
  • Unit uses base for wiring.
• Addressing
  • Addressable by device.
  • Direct Decade 01-99 (MS-9200) and 01-159 (MS-9600) entry of address.
• Architecture
  • Unique single source, dual chamber design to respond quickly and dependably to a broad range of fires.
  • Sleek, low-profile design.
  • Integral communications and built-in type identification.
  • Built-in tamper-resistant feature.
  • Removable cover and insect-resistant screen for simple field cleaning.
• Operation
  • Withstands air velocities up to 1,500 feet-per-minute without triggering a false alarm.
  • Factory preset at 1.5% nominal sensitivity for panel alarm threshold level.
  • Visible LED �blinks� when the unit is addressed (communicating with the fire panel) and latches on in alarm.
• Mechanicals
  • Sealed against back pressure.
  • Direct surface mounting or electrical box mounting.
  • Mounts to: single-gang box, 3.5" or 4" octagonal box, or 4" square electrical box (using a plaster ring).
• Other System Features
  • Fully coated circuit boards and superior RF/transient protection.
  • 94-V0 plastic flammability rating.
  • Low standby current.
• Options
  • Remote LED output connection (Part No. RA400Z).

Description

The CP355 Addressable, low-profile (Height: 1.7 inches) plugin Ionization Detector uses a state-of-the-art ionization sensing chamber to provide open area protection and is used exclusively with Fire-Lite-s MS-9200 and MS-9600 Addressable Fire Alarm Control Panels. The ionization detector is used to sense products-of-combustion and report the measured level of such products to the fire alarm control panel. Since this detector is addressable, it will help emergency personnel quickly locate a fire during its early stages, potentially saving precious rescue time while also reducing property damage. Two LEDs on each sensor light to provide a local, visible sensor indication. Remote LED annunciator capability is available as an optional accessory (Part No. RA400Z).